ANSI/IEEE Standard Transformer LV Bushing/Epoxy Bushing/Secondary Bushing.

Cast as a single piece, this epoxy resin bushing supports 1–42 kV and 250–8000 A, for dry-type and oil-filled transformer use.

Epoxy resin bushing body color: normally is brown or ansi gray, other color can be customized

Hole numbers: For inside terminal, normally 4holes or 2 holes.  For outside terminal, hole numbers can be 4,6,8,10,12,14,16,18 or 20.

                          Inside terminal and outside terminal can be parallel or vertical to each other. 

Hole center distance: normally 44.5mm horizontally and vertically. It also can be customized as needed

all unit will be applied following testing before load

Leakage test

Stud push‐out test

Stud torque strength test

Cantilevel test

Flange torque test